CNC V2 first cuts!

3 years ago
15

I wanted to test out CNC V2 and the new spindle, so I ran a simple job and it turned out way better than I was expecting!

The spindle is a cheap 500W unit from BangGood.

The tool is a cheap, 1/8", carbide, single flute end mill, also from BangGood.

The Gcode was generated in FreeCAD and post processed to correct errors and sent to the machine, with bCNC.

The machine is printed from PLA and PETG sourced from the excellent filaments.ca, and is running GRBL 1.1f.

Loading comments...