Makerbase MKS DLC 2.0 GRBL Laser CNC controller board Installation Review

I bought two of these boards to control my GRBL laser cutter and future CNC Project. The MKS DLC is pretty much a Arduino Uno and Ramps board combined. I like the small package and clean design. The laser/spindle outputs are controlled by a mosfet. One of the unique features is the Dual Y axis outputs. Most CNC and Laser cutters use a dual steppers for the Y axis. I already had a MKS TFT32 so I was able to reuse it with this board. The PWM output for the spindle / laser is 5V 1KHZ.

MKS DLC 2.0 Board On Amazon
https://www.amazon.com/gp/product/B08KT7436H/ref=as_li_tl?ie=UTF8&tag=fintechcomm0f-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B08KT7436H&linkId=88fcccfff3c7daf1bc00e61c53fdd6c7

My Controller Box on Thingiverse
https://www.thingiverse.com/thing:4649741