Replacing a Worn Out Modular Ice Maker

After 10 years of use, the plastic coating on the ice cube mold failed and the ice maker needs replacement.

Was unable to find an exact parts match to the original ice maker W10190934 but found a later model number that seemed to be a good match.

Whirlpool Ice-maker W10190965:
https://amzn.to/3mrHKiy

Modular ice maker diagnostic information:
http://www.american-appliance.com/old_Site/service_pages/Ice_Maker/modualimdiag.htm

The original 2007 ice maker was replaced under warranty in 2010. It had a failed heater coil and the service tech used the test points on the front of the unit to diagnose that problem. Another common failure point is the control module on the front of the ice maker. Since I now have two working modules, I wanted to make sure the new unit I purchased would be compatible with those older modules.

More to come, we'll take a look at how this ice maker works inside...

Subscribe for more content like this
Comment, rate, share & click the bell icon
And as always, thanks for watching

Intro/Outro:
Louisiana Fairytale by Austin Rogers
http://drfiddle.com/show_tune.php?id=94