Rust Removal Classic Car Restoration

https://www.proshaper.com
Our Amazon Storefront:
https://www.amazon.com/shop/proshaper

Rust Removal Classic Car Restoration

This video goes over and shows the rust removal process on classic cars during the restoration process. Wray is anti sand blasting because it will warp the metal, and sand gets everywhere and you'll be sucking it out for weeks.

Since we have a lot of rust on our Scout 800 and the 1952 Cadillac Convertible we decided to show how quick and effective removing rust with simple solutions found at home depot.

We start by removing the paint with Klean Strip Premium Stripper paint remover. Once the surface is clean and we spot rust we dose the rust with naval jelly, dabbing it on with a brush. It's best to let it sit for a few hours until you see the jelly turn black. Take a putty knife and start scraping the rust off. It should remove most if not all the rust with the first application. If there is any rust left just apply another dose. Once the naval jelly is off we use concrete & metal prep from home depot with a coarse steel wool. When the surface is free of rust and paint, we typically use soapy water to remove the film left behind from the naval jelly. Now the surface is all set for you to start your restoration project.

Email: Wray@Proshaper.com
Website: https://www.proshaper.com
Facebook: https://www.facebook.com/ProShaper/
Instagram: https://www.instagram.com/proshaper/
Twitter: https://twitter.com/ProshaperM
Linkedin: https://www.linkedin.com/company/proshaper