Premium Only Content
![Making a Liner Lock the Easy Way - Part 3](https://1a-1791.com/video/s8/1/I/D/k/L/IDkLe.qR4e-small-Making-a-Liner-Lock-the-Eas.jpg)
Making a Liner Lock the Easy Way - Part 3
Most knife makers don't make folders. I hope to change that a bit. This process uses hardened drill
template patterns to help in the fabrication of a liner lock. The goal is to make available the patterns, that
guys who are new to folder making, can use. There may be a blatant "buy this" from us kinda thing going on
here, but I'll try and keep that to a minimum.
Metal:
.125" or 1/8 CPMS35VN for the blade - this should be slightly oversize and you bring it to thickness
.070" Ti for the liners - I've done these in .070" up to .125" I'd suggest .070" for your first.
Parts list:
(2) 3/16" thick g10 or Micarta(tm) material for the scales
(1) 3/16" thick g10 material for the spacer bar.
(1) 3-hole Ti pocket clip
(2) 6-64 disc pivot heads
(1) barrel pivot threaded 6-64 ID and 3/16" OD"
(6) 1/2" 2-56 button head screws
(4) 3/8" 2-56 button head screws
(1) 1/8" stop pin
(1) 2mm ceramic detent ball
(2) .015" thick PB washers in 3/16" ID and 3/8" OD
(1) thumb shredder thumb stud
(1) 1/4" 2-56 button head screw for thumb stud
Tools required:
caliper or micrometer to measure your parts and metals
vice grips style pliers
surface plate or machinist parallels (or both) or something dead flat to check the metal
layout fluid
carbide scribe
drill press
#49 drill
#13 drill
3/16" drill
1/8" drill
1/8" reamer
3/16" reamer
#19 drill
#42 drill for through holes for the 2-56 screws
Dremel or other rotary tool with cut off wheels
grinder of your choice
disc grinder to debur is optional but darn nice, other wise sand paper on a flat surface
a half ton hand arbor press or a bench vice to straighten metal if need be. (There are other ways to straighten metal also.)
2-56 tap
tapping fluid
countersink to debur holes
USAKnifemaker: http://usaknifemaker.com
KnifeDogs: http://usaknifemaker.com/kdforum/
Part 1: http://www.youtube.com/watch?v=GUUgf3sOor0
Part 2: http://www.youtube.com/watch?v=IWKMyy2snQs
Part 3: http://www.youtube.com/watch?v=12mxitdcVq4
Part 4: http://www.youtube.com/watch?v=ErpN4mCJy1Y
Part 5: http://www.youtube.com/watch?v=1K7-vr16ZE8
Part 6: https://www.youtube.com/watch?v=XG80Eijul18
-
3:37:41
Fresh and Fit
8 hours agoGirls React To Lily Philips Sleeping With 100 Guys
137K64 -
27:00
Stephen Gardner
10 hours ago🔥McConnell ATTACKS Trump | HUGE Update on MILITARY DRONES mission!!
115K156 -
8:10:03
Dr Disrespect
19 hours ago🔴LIVE - DR DISRESPECT - WARZONE - HUNTING SEASON
263K77 -
1:32:28
Fresh and Fit
12 hours agoHow To Wholesale and Fix & Flip Real Estate!
75.7K11 -
1:30:55
Flyover Conservatives
1 day agoDrones, Darkness, and Divine Intervention: Unpacking Prophecy and Reality - Dr. Troy Spurrill | FOC Show
47.6K3 -
59:32
The StoneZONE with Roger Stone
10 hours agoHonoring Great American Patriots for Helping to Save our Country | The StoneZONE w/ Roger Stone
98.1K8 -
1:09:50
Donald Trump Jr.
15 hours agoHow Sean Parnell Helped Deliver PA, Plus Why Pete Hegseth Must Be Confirmed | TRIGGERED Ep.199
221K95 -
1:58:03
Tucker Carlson
13 hours agoJeffrey Sachs: The Inevitable War With Iran, and Biden’s Attempts to Sabotage Trump
224K393 -
1:31:00
Redacted News
15 hours agoBREAKING! Trump demands answers on UFOs over America as Pentagon hides the truth | Redacted News
214K370 -
1:07:45
BIG NEM
13 hours agoSpiritual STDs, Nikola Tesla & Harnessing Creative Energy! ⚡💡
39.6K2