Turbo Tile and Grout Cleaning Tool - Wand Skipping and Skip Marks?

Turbo Tile and Grout Cleaning Tool - Wand Skipping and Skip Marks? Your turbo tile and grout cleaning tool may be leaving wand skipping and/or skip marks on your client's tile and grout.

The following reasons may be the culprit:
Slit in your vacuum hose
Wand Bar has crud or debris on it.
The filter on Hose Inlet needs to be cleaned.
Vacuum (around white hard surface glide) has dirt and debris inside...
Moving too fast. Not going in 10' lengths (forward and back) edge of grout...
Bad Ceramic Swivel (repair or replace)
Wand Skipping sucks! Leads to callbacks or just frustrating days!

Tip: Brush Boot is not the same action! The turbo does not scrub!

My Website www.lasvegastileandgroutcleaning.com