Knife Making: DIY Hand Forged Damascus Hidden Tang Knife Build: Part 1 Forging the Blade

In this video I start my first Damascus blade. It is 15 layers of 1084 and 15n20. Thermo cycled 4 times just to ensure the grain had settled, then quenched. I did 3 cycles of etching which consisted of etch in ferric chloride for 5 minutes, neutralize each time, lightly sand with 1200 grit and clean before the next cycle. Once all the etching was done, I heated water in the microwave to around 150 degrees F and added about two cups of instant coffee. The blade stayed in that for about 4 to 5 hours. Rinsed with cold water and lightly oiled with olive oil and polished with a jewelry cloth. In the next video I plan on making and fitting the guard along with making the handle and finishing this guy up.

Stay tuned for Part 2, where we fit the guard and handle to this little guy.

#damascus #knifemaker #diy #handmade #ladderpatterndamascus #lowlayerdamascus

Consider becoming a member of my patreon! Click the link below. Im just starting out but once I get to 25 members I plan to start doing build giveaways that will only be available to patreon members. The more support I can get from the patreon community, the more frequent I'll be able to make and post videos. Eventually possibly making exclusive content just for patreon. Thanks for the support!

http://www.patreon.com/stancoironworks

Facebook https://www.facebook.com/StanCoIronWorks

Instagram
http://www.Instagram.com/stanco_ironworks

If your interested in purchasing this knife any other knives shoot me an email and we'll chat!

klab233@gmail.com