AndrewRalph

Company didn’t want to provide a shifter bracket that Ben paid for with his trans kit so we fabricated our own bracket. They never did send that bracket either, we would still be waiting. Ben’s Channel: https://youtube.com/user/simman22

I use the winch on my raptor to pull some bushes out that our friends had trouble digging out!

Gasket and spark plugs

My trimmer hasn’t been running strong since I started it this mowing season. As it turns out the carburetor was pretty nasty.

I can’t park a trailer in front of my house so I decided to build a drive through gate into my side yard so I can park a few tings behind the fence.

We install some new eBay brakes, find some almost catastrophic failures, and measure the suspension for the lift kit we are fabricating.

Poll at 02:00 Click icon in top right of video If the poll doesn’t appear just leave a comment below for your vote! We are in the process of building a 20’ gooseneck trailer and I need your input for its color. Silver to be different than the rest and match my trucks, or gloss black to be more incognito and easier to touch up?

Ben had an engine with stripped torx head bolts on the cam retaining plate on his gen 4 LS 6.0. We welded nuts on the bolt heads and easily removed them with a socket! This engine eventually went into his drag racing vette that can be seen on the track on his channel. Ben’s Channel https://youtube.com/user/simman22

On this video we repair a broken seat bracket and make a led light bar bracket for my ATC 70 then rip it around the yard with my 3 year old!

This week we finish up the ZR2 Blazer’s interior by removing the factory seat covers, treating them with stain remover and running them through the washing machine a few times. The seats went from pretty grungy with coffee stains up front and grease and dirt on the back of the rear seats to what seriously looked like brand new factory seat covers. This Blazer really transformed from a dirty work truck to a very nice, clean, capable SUV! Subscribe to the channel, leave comments, and give the videos you like and want to see more of a thumbs up!

Visited my Dad in Florida so I decided to help him put new 5/4 boards on his deck but the project got a little longer when we saw the condition of the framing. Overall the build went smooth and it turned out pretty nice!

AWD BMW 330xi gets a steel tube bumper and a winch. This bummer is ready anything now!

Jeep YJ troubleshooting after a year of storage and replacing Dana 44 ball joints.

The drain plug to the BMW 330xi snapped off in the oil pan with almost no force. On top of the price of oil and filter, I ran and bought 3 different types of bolt extractors and reverse bits to get the remaining plug out without having to drop the oil pan.

New exhaust, new tensioner and belt, new driver door pin, charging the A/C. This Blazer sure is turning out nice!

We build a custom lift for our 2001 BMW 330xi, and install a set of 27" Federal Himalaya snow tires. First we measure the wheel travel compared to the suspension travel to figure out how tall our spacers need to be then we plasma cut a bunch of plates and get to welding. Overall we added 3" of ground clearance with the 2" rear lift, 1.5" front lift and 2" taller tires. Now this vehicle will be extremely capable in the snow and crossing the mild mountain passes in the area.

A well used Chevy ZR2 Blazer needs a thorough interior cleaning, carpet was so stained I decided to remove it and hit it with detergent and a pressure washer!

Building the flat bed spare tire carrier for the 39" mud terrains

Working on the new flat bed for my G56 swapped 07' Dodge Cummins 2500 Megacab. Plenty of additions to this bed as the project goes on. I want to add a small crane, and a rear rack to haul long lengths of wood and metal over the cab. The video equipment used for this video was old and of poor quality, I upgraded immediately following this recording.